Our purpose is to support owners in their use and maintenance of the Porsche 928 and to foster camaraderie among owners throughout the world.
Welcome, Guest
Username: Password: Remember me
Welcome to the 928 Owners Club Forum!

Tell us and our members who you are, what you like and why you became a member of this site.
We welcome all new members and hope to see you around a lot!

TOPIC: Good Engine Machine Shop Tampa Bay Area?

Good Engine Machine Shop Tampa Bay Area? 21 Aug 2017 19:30 #19953


  • Posts:10
  • Kermit928S's Avatar
  • Kermit928S
  • Junior Forum Member
  • OFFLINE
  • Karma: 0
Do any members in Florida know of a good Engine Machine Shop in the greater Tampa Bay area with knowledge & experience with 5.0L and 4.7L motors? Or do I need to look farther? I need 5.0 pistons fly-cut for 16v euro heads, and the usual jet clean, boring-honing, possible decking, checking for cracks, etc., related to a proper engine rebuild (5.0 short block, the rest is euro 4.7).

If anyone has sent 5.0 pistons out to be fly-cut, I would appreciate hearing where that was done.

Thanks very much for any info.


Pete
The administrator has disabled public write access.

Good Engine Machine Shop Tampa Bay Area? 03 Sep 2017 13:22 #19971


  • Posts:4 Thank you received: 1
  • Boudreaux's Avatar
  • Boudreaux
  • New Forum Member
  • OFFLINE
  • Karma: 0
You may want to ask Frank Eibell over at Eibell Performance who he uses. He's just off 19 near Clearwater. I think he services quite a few 928s in the Tampa Bay area. Best of luck!
The administrator has disabled public write access.
The following user(s) said Thank You: Kermit928S

Good Engine Machine Shop Tampa Bay Area? 04 Sep 2017 09:08 #19972


  • Posts:10
  • Kermit928S's Avatar
  • Kermit928S
  • Junior Forum Member
  • OFFLINE
  • Karma: 0
Thanks very much Boudreaux! :) That's close enough to drive to. Much appreciated.
The administrator has disabled public write access.
Moderators: mm928
Time to create page: 2.343 seconds